Another Plateosaurus Preamp!

I'd previously built a couple of the PedalPCB clones of the Benson preamp - one for a friend to gig with, and one for myself. As these are a little tricky to get set up right, I only make them on request as a part of a custom order. Another regular had requested one as a larger batch of pedals, so I pulled out my last PCB and started working!

Another Cool Custom Pre-amp! Cloning the Peavey Decade

I got a request for a pedal that recreated the pre-amp portion of the Peavey Decade amplifier. The Peavey Decade is an old-school solid state amp that has been used by a lot of bands. It has waxed and waned in popularity over the years, but it is popular enough that there are a couple of fairly boutique guitar pedals that emulate it's preamp section. PedalPCB makes a preamp board, called the Decadence Preamp. So with board in hand, I got cracking!

The Very Model of a Modern Master General? A New Steggo Fuzz Clone!

Steggo had gotten a request for a clone of the EQD Fuzz Master General. That pedal is an update of the vintage Ace Tone FM-2 Fuzz Master Professional, which was famous for it's fairly untamed octave up character. Fortunately PedalPCB had a board ready to go in the Fuzz Cadet, so I grabbed a couple of boards and got cracking!

A New Combo Pedal - The Brachyceratops Overdrive

Sometimes I get a request for a pedal and then immediately wonder why I hadn't already done something along those lines. One popular combination pairs a Klon Centaur with a Marshall Bluesbreaker. I've done several different versions of the Klon Centaur over the years, and I really enjoy building them. I've also recently done a new dinosaur version of the Bluesbreaker, the Blues Brachiosaurus. In the background I'd been working on my own version of the Bluesbreaker, so when I got a request for the combo pedal, I decided to go all out with the new Bluesbreaker board and one of my favorite Klon boards as well!

A Custom Miragaia!

A couple of years ago I'd built a few clones of the Mountainking Megalith using the PedalPCB Arkaim Fuzz board. These have been somewhat popular, and I have an updated version of the "Miragaia" enclosure in the works. In the interim I'd gotten a request for a custom "doomy" pedal - with Steggi on it. So we aligned on using the same circuit - with a custom enclosure!