New Black-Ash Variant - Closer to the Original

Back in December I finished up a clone of the EQD Black Ash fuzz pedal. For that first validation build I went with all modern components, but the original Black Ash used a lot of vintage bits in its construction - including carbon composition resistors and what appear to be paper in oil capacitors. I wanted to experiment with the components a bit and decided to try to take the build a few steps closer to the original to see if it made much difference.

Cloning the Rare EQD Black Ash

The EQD Black Ash was a limited production fuzz pedal using a variety of vintage parts including carbon composition resistors and paper-in-oil capacitors. The total production was limited to 1500 units, and prices are rapidly rising at this point, with examples starting at roughly $300 and going up from there. When it came to cloning this particular pedal, I'd considered going with a vintage build like I've done with a variety of other pedals, but I've found they often have a higher noise floor than pedals with modern components so for this build I decided to go with modern components to validate the design and sound. I may go back and do a vintage build at some point in the future, though!