Steggo Out of the Office August 1-4

Steggo is going to be out of the office for a few days, so the Reverb shop is closed until late Thursday / early Friday. The dinos will still have access to messenger and email, but nothing will be shipped or worked on until the end of the week at the earliest - more likely Monday...

Cloning the Rare Boss CE-1 Chorus... Well... Kinda!

There are certain vintage pedals which are much harder to clone today than they were once upon a time. Among these are chorus pedals, flangers, phasers, and basically anything that relied on a specific integrated circuit to do the heavy lifting in terms of audio signal modification. While Moore's Law has continued unabated for over a half century, and despite the fact that modern semiconductors consist of  literally over 100 billion transistors on a single processor die, certain integrated circuits go completely out of production and ultimately become exceedingly rare. 

One pedal design I've always wanted to clone is the Boss CE-1 Chorus Ensemble, largely because (I'm sure you'll be shocked) Alex Lifeson used one at one point. However, there hasn't been a decent DIY clone out there - largely because the original uses obsolete Panasonic MN3002 BBD chip, and these are getting increasingly hard to find. PastFX has a clone of the original they've sold for years, but even after cornering the market on MN3002 chips, they're running out. As such they're released a version of the pedal using the more common MN3007 chip. Because of the rarity of the required chips, the MN3002 version runs about $350 US while the MN3007 version clocks in just north of $200 US.

Distortion Pedal Meets Business Card?????

In the world of guitar effects pedals, there are a lot of cool ideas and amazing variations on the theme. Some builders go the high tech route with programmable logic chips. At the other end of the spectrum you have builders still using perf board or direct connections (and their soldering is elevated to the level of art in many cases). One of the most interesting ideas I'd seen for a DIY pedal is the Godcity Instruments Brutalist Jr. distortion pedal. Kurt Ballou literally had his business card made up as a PCB that you could populate on your own. He provided a set of instructions and modifications on his website (which are still there). Sadly, the business card DIY version itself is sold out at the moment, but Effects Layouts has a trace and etching pattern - so I took the plunge!

Blues Driver with a Ukrainian Dinosaur - Redux!

A couple of weeks ago I posted a pedal I'd just finished which I'd intended to use as a donation for Pedals for Ukraine. Unfortunately once I got the enclosure back, I realized that there was a typo, and the there were some issues with the dinosaur - the contrast wasn't as good as I'd hoped. So, I resolved to revamp the artwork and give it another go. The enclosures finally came in today, so I got cracking!

Another Ceriatone??? The Goth Version...

When I finally finished my first Ceriatone Centura a few weeks ago, I still had a spare unpopulated board lying about. I'd picked it up several months ago along with the one I used for the gold enclosure built along with some other parts for... another project I'm working on. One I hope to feature on the blog in the future, but I digress! My previous Centura build sounds awesome, but now that I had one working, I really wanted to try and build one using the component load-out from the original Centura. So, I set about populating a new board!

Grab Bag Sale Update! Only 2 Pedals Left!

There are still a couple of pedals left in Steggo's second Grab Bag Sale. The Eggeaux Steggo G-2 has sold, but the Centurion and Meteor are still available (modeled by Kyle the Ankylosaurus below). In an effort to find these new pedals new homes, we've made a final markdown - $79 for one (your choice) or $149 for both!

New Allen Bradley Thagomizer I - With a Few Modern Replacement Capacitors

I knew the day would eventually come when some of the New Old Stock components I'd been using on my Thagomizers would start to dry up, I just didn't expect it to come so soon! While I'm pretty well set for resistors, tropical fish capacitors, ceramic capacitors, etc., it's the older validated (as opposed to dead) electrolytic capacitors which are drying up - which I guess shouldn't be a surprise. At this point the 22μF Bianchi - Phillips capacitors seem to be gone. I've therefore had to make a modern substitution, but it appears to be the same substitution my European source of parts is making on his sets with the Iskra and Phier resistors as well.